Sanipack Macerator Pump For in Wall Frame System 011

Install a Toilet Anywhere You Want. High Level Of Styling.
Installing a bathroom where you want is often difficult and sometimes even impossible. The main drainpipe is either too far away, or the new bathroom or sink will be lower than the drainpipe, making conventional installation unworkable.
The Sanipack is built into a wall cavity provided by a concealed frame system. The reservoir is also built into the wall and all the user sees is a large push button that activates the flush. The Sanipack is a system that is used to install a complete bathroom up to 9 feet below the sewer line, or even up to 100 feet away from a soil stack.
Since the reservoir, the macerating pump and the pipes are hidden from view, this type of installation gives you the lean and clean look of a European bathroom. The Sanipack is simplicity itself to install. there are just four connections:

The macerating pump is connected to the discharge pipe coming from the wall hung toilet.
The toilet tank is connected to the water supply.
The macerating pump is connected to small diameter discharge pipe work.
The macerating pump is connected to electrical supply. Note: the toilet bowl and wall carrier are supplied by other manufacturers. Sanipack can be used with any North American wall-hung toilet system



Motor RPM
3600

Horsepower
0.3

Electrical Supply
110-115V. 60Hz.

Flow rate at max head USG MIN
9 ft:22 usg/min.3 ft:26 usg

Amperage
5.4 AMP

Discharge Pipe Diameter
3/4" diameter

Vertical Discharge
9 ft

Horizontal Discharge
100 ft

Gravity fall on horizontal installations
1/4" per ft

Normal Running Time WC
10-15 seconds

Maximum Temperature
104°F

Water Consumption
1.3 US gal -WC Dependable

Dimensions (measured from floor level)
H11" x W16¾" x D4¾"

Materials
Polypropylene, C.R.P., stainless steel, Neoprene