Saniplus Toilet with Macerator Series Pump

Saniplus Toilet with Macerator Series PumpFeatured Saniflo Video
Install a Toilet Anywhere You Want. High Level Of Styling.
Installing a bathroom where you want is often difficult and sometimes even impossible. The main drainpipe is either too far away, or the new bathroom or sink will be lower than the drainpipe, making conventional installation unworkable.
The Saniplus is a system that is used to install a complete bathroom up to 15 feet below the sewer line, or even up to 150 feet away from a soil stack. The macerating system of the Saniplus can handle up to four fixtures, toilet, hand basin, shower and bathtub. The Saniplus toilet uses only 6 liters (1.6 USG) of water per flush. The Saniplus macerating system is comprised of a pressure chamber, which starts and stops the unit, and the motor, which drives the stainless steel macerator blades and pump. A normal operating cycle for Saniplus takes about 10–20 seconds depending upon the discharge pipe run configuration. power consumption is therefore minimal.


Toilet has a Rear Spigot
Requires 1.6 gallons (6 liters) of water per flush
Includes Macerating pump
Toilet bowl in a choice of white or biscuit
White Toilet available as rounded (1.6GPF) or elongated (1.28GPF ADA Compliant)Optional Extension pipe available for remote mounting of pump

Toilet Seat Not Included

Optional Sani Alarm:

SaniAlarm has a level pressure switch that triggers an alarm fixed on the top of the unit if the volume of water exceeds the maximum allowed level. The alarm emits a continuous 80 dB warning sound, until it is switched off and the problem rectified.

SaniAlarm is battery operated and can be fitted on most models* in the Saniflo range, including Sanispeed and Sanivite pumps.
Dimensions: Pump only-12" H x 21" W x 9" DVoltage: 110HP: .4Amperage: 4.5